Advertisement

Air Conditioning Installation: Simple Steps to Follow

Advertisement
Air conditioning installation techniques can prove to be very vital in those days when it's not so cool. During the summer days, you could experience some blistering hot temperatures that can be really annoying and frustrating, especially if you don't have an air conditioning unit. In addition to this, when the heat begins to take its toll, you may even be totally convinced that the best invention ever to grace mankind is an air conditioning system. It doesn't matter where you are at any particular time during summer, you will have a constant need to cool down. However, after you have purchased your very own air conditioning unit, you will now need to install the system, before you can enjoy and take pleasure in that wonderful clean cool air. For air conditioning installation, it's usually a simple and extremely straightforward project.

Let's look at some air conditioning installation techniques and what you need to do when installing your air conditioning system. Firstly, you will need to have the necessary tools for you air conditioning installation project. You will need a caulking gun and waterproof caulk, measuring tape and pencil, mounting hardware, the manufacturer's foam insulation, screwdriver, screws and of course your air conditioning unit.

The next step for your air conditioning installation project is to measure the area which you intend to cool. Another thing is to calculate the size of the air conditioner that you will need to install, because you wouldn't want to install a unit that is not capable of cooling the entire area. A good tip to remember when you are measuring your area for air conditioning installation is that a 12, 000 British Thermal Unit capacity will cool a 500 square feet of any room.

Your next step in your air conditioning installation project is to determine exactly where you want to install the unit. You should also do some more measuring by measuring the window opening, the thing is, any air conditioning unit that you purchase should properly fit into the opening. However, the problem is, not all of the air conditioning units are the same size. When you have determined the location where you want your unit and the appropriate measurement, you should go ahead and install the mounting brackets that accompanied your air conditioning unit. One important rule to follow to be successful in your air conditioning installation project is to ensure that you carefully follow the manufacturer's guidelines and directions.

Another step is follow the manufacturer's instruction by sliding the air conditioner into the window opening and attaching it to the mounting brackets. It gets really simple from here on, as now all you will need to do is lower the window down onto the top of the unit and take your time in pulling out the extensions on each side of your AC system and attach the wires to the window frame. Carefully use the foam to seal between the top of the unit and the window. Then attach your drainage hose to the outside of your unit, to help keep the warm air outside, you will have to caulk around the outside. The final step in your air conditioning installation project is to plug in your unit and enjoy all that cool air on your body.


ABOUT THE AUTHOR: DAVID PATULLO
For more great information about air conditioning prices, visit our new website http://www.airconditioningprices.net today.

Share Article


Sponsored Links

Related Articles